Aim-tti MX180TP可编程直流电源

Aim-tti MX180TP可编程直流电源：Bench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs, 2 x 180 watts plus 1 x 18 watts, USB, RS232, LAN & GPIB Interfaces

Aim-tti MX180TP可编程直流电源：
Bench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs,  2 x 180 watts plus 1 x 18 watts, No InterfacesBench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs,  2 x 180 watts plus 1 x 18 watts, USB, RS232, LAN & GPIB Interfaces

• 375 watts plus of total power
• Two high power outputs plus one low power output
• High power outputs each capable of 30 volts at 6 amps
• Range switching provides up to 120 volts or up to 20 amps
• Low power output provides up to 12 volts or up to 3 amps

• Three high performance outputs, two of 180 watts each and one of 18 watts
• Total power of 378 watts in a highly compact package
• Range switching gives up to 120 volts and up to 20 amps
• Twenty one range combinations for maximum flexibility
• Up to 360 watts from a single output
• Low output noise and ripple via linear final regulation
• High setting resolution of 1mV and 1mA
• Variable OVP and OCP trips on all outputs
• 50 setting memories per output + 50 linked memories
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense on all outputs
• Graphic LCD provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• Individual or combined output on/off control with programmable delay sequencing.
• Front panel locking with optional pass-code protection
• 3U half-rack case for bench or rack mounting
• GPIB, RS-232, USB and LAN (LXI) interfaces (MX180TP)

Aim-tti MX180TP可编程直流电源：
The MX180T has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A.

Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. Mixed-mode regulation To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design.

Excellent line and load regulation is matched by low noise and good transient response. Range switching and power control To increase its ability to match a variety of applications, each output has more than one range.

Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1..

When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output. Remote control for system applications The MX180TP incorporates USB, RS232, GPIB and LXI compliant LAN interfaces.

These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.

Duplicate power and sense terminals are incorporated at the rear.

The compact half-rack 3U size uses  front input ventilation which enables vertical and horizontal stacking without the need for additional ventilation space.

A 3U rack mount suitable for one or two units is available.
Aim-tti MX180TP可编程直流电源：

DRIVER SOFTWARE SUPPLIED (MX180TP only)
IVI Driver	An IVI driver for Windows is supplied. This provides support for common applications such as LabView*, LabWindows*, HPVEE* etc.
USB Driver	An installation file is supplied which calls a standard Windows* USB driver.
* LabView and LabWindows are trademarks of National Instruments. * HPVEE (now Agilent VEE) is a trademark of Agilent Technologies. * USB interface is supported for Windows 2000, XP, Vista, 7 and 8 (including 64 bit versions). Windows is a trademark of Microsoft.

Aim-tti MX180TP可编程直流电源

GENERAL SPECIFICATIONS
Input:
AC Input	110V to 240V AC ±10%, 50/60Hz. Installation Category II.
Input Power	600VA max.
Temperature & Environmental:
Operating Range	+5ºC to +40ºC, 20% to 80% RH
Storage Range	-40ºC to + 70ºC
Environmental	Indoor use at altitudes up to 2000m, Pollution Degree 2.
Cooling	Intelligent variable-speed fans.
Safety & EMC:
Safety	Complies with EN61010-1
EMC	Complies with EN61326